MENU

CATALOGUE

SUBSCRIBE

SEARCH

We supply a wide range of quality Dental Supplies. We cater specifically to Dental Clinics and Laboratories, providing everything you can need. 

Select Currency
  • ECO 450
    For Laboratory Brush motor
    Speed Range: 0~45,000 rpm
  • Escort III
    Embedded Handpiece Cradle and Bit Stand
    Automatic Safety Overload Protection System
    Variable Speed Control by Foot
  • Forte 200 - Saeshin
    Knee control.
    Ergonomic and functional design of the power unit.
    High durability.
    Smooth speed regulation in the range of 0 to 50,000 revolutions per minute.
    A powerful, efficient engine.
    Low noise and vibration during operation. Maximum performance.
    TWIST-LOCK type lock
    Power unit controlled by a microprocessor, whose task is to control the device's operating parameters. Self-diagnosis program of the device with information about possible problems, memorizing work parameters.
    Automatic recognition of the type of connected micromotor.
    Foot pedal, smooth speed control of the micromotor.
  • Forte 400S - Saeshin
    The brushless motor allows you to achieve high torques with reduced vibrations and noise.
    Designed to minimize weight and diameter, making it particularly well-suited to a small hand.
    Independent speed sensors have been used to improve the response to load changes and to maximize torque in the full speed range.

    The most important properties:

    Ergonomic and functional design of the power unit
    High durability
    Smooth speed regulation in the range of 0 to 50,000 rpm
    A powerful, efficient engine.
    Information about the engine load displayed on the diode line
    Low noise and vibration during operation; maximum performance
    TWIST-LOCK type lock
    Power unit controlled by a microprocessor, whose task is to control the device's operating parameters; program of self-diagnosis of the device with information about possible problems
    Automatic recognition of the type of connected micromotor
    Foot pedal, smooth speed control of the micromotor
    The "autopilot" function - after maintaining the speed for about 3s, you can release the foot control and the motor will work until you press it again
  • Marathon 4
    For Laboratory Brush motor
    Speed Range: 0 ~ 35,000 rpm
    Embedded Handpiece Cradle and Bit Sand
    Forward & Reverse Switch / On & Off Foot Switch
  • Marathon N2
    For Laboratory Brush motor
    Speed Range: 0 ~ 40,000 rpm
    Automatic Safety Overload Protection System
    Forward & Reverse Switch / Variable Speed Control by Foot
  • Marathon N7
    For Laboratory Brush motor
    Speed Range: 0 ~ 40,000 rpm
    Automatic Safety Overload Protection System
    Forward & Reverse Switch /
    Variable Speed Control by Foot
    Motor: SH40L
  • Handy Eco
    Needless to say its very high power as a brushless
    controller, Handy-Eco is most proud of its space
    applications for both vertical and horizontal style.
    It has a round cradle for a motor handpiece with a
    digial LCD. You can easily move Handy-Eco to
    anywhere, providing its high quality as a brushless
    controller. And it can limit the speed through a
    hand dial, targeting at a safety work.
    Speed Range: 1,000 ~ 50,000 rpm
    Motor: BS50C, BM50S1
    Variable foot speed control pedal: FS-60N
  • Marathon Champion Micromotor
    The Marathon 3 Champion is a non‐stage speed dialing system. 40K
    Contains:
     Protective plastic cover. Powerful control box. Forward & reverse switch.
     Compact and portable size
     Continuous variable speed control. On/off foot switch
     Max Speed . 40,000 rpm
     Max Torque250 gf.cm
     Electric Power40 W
     Weight: 148 g
     Dimension: 143 mm ( L ) x 25 mm ( D )
    MARATHON M‐3 Champion Includes:
     Control Unit
     On/Off Pedal
     Handpiece
     Handpiece Stand
     1/3 More Torque and Power than Regular Marathon
     Automatic Stop
     Reset with Overloads
    NZ$ 465.00
    NZ$ 399.00
  • The Dynamic Duo
    Dynamic Duo V35/ThermaKnife Combo Unit Complete-
    Multi-Speed options (14k, 22k, 27k, 35k rpm) allows for ideal speed selection for most cutting needs.

    High-Torque motor provides smooth operation and powerful performance with less operator fatigue.
    Fully adjustable temperature control for precise cutting action. Cutting tip heats ultra-fast to save time and eliminate waiting.

    A & B selection switch allows for the use of two different Thermal Pens to reduce time and increase trimming productivity.

    Lightweight pen features an ergonomic design and sharp, permanent tip for improved comfort and control.
  • Traus B110 - Saechin
    - BLDC type
    - Compact Design
    - Excellent Durbility

    Hand/Foot speed control system FWD/REV Function Auto-Cruise Function Handpiece: 202g (H180) Lowest Noise and vibration.
  • Escort II Micromotor Complete - MARATHON ­
     Control Unit
     Pedal
     Handpiece
     Handpiece Stand
     With speed Control Pedal
     Automatic Stop
     Reset with Overloads
     35000RPM
     Excellent Torque
     Operation Manual
     Powerful Torque and Continuously Variable Speed Control
     No Heat After Long Hours of Operation By Effective Electrical Design.
     Easy change of Driving Direction of Efficiency
  • Handy 700 Micromotor - Marathon, 50K
    Handy700 (50K) brushless
    · Max speed : 50,000 rpm
    · 7.8 Ncm
    · Digital speed display window
    · Maximum speed set mode possible
    · Less noise, less vibration
    · Excellent durability
    · Self-diagnosis function
    · Auto-cruise function
    · Variable speed control pedal(FS60N)
    · Handpiece cradle attached
    · Magnetic bur holder attached
    · Easy-carry with handle
    NZ$ 1,420.00
    NZ$ 1,299.00
  • Micro Handpiece Only - Marathon
     For micromotor.
     Good for Escort 2 N1
     45000rpm
  • Multi 600 Brushless Micromotor- Marathon
     Knee Type 220v
     Speed: 1,000 ‐ Max 50,000rpm
     Low noise, Low vibration.
     Excellent Durability
     Self‐Diagnosis Function.
     Error Code Display Function.
     Auto‐Cruise Function
    NZ$ 1,200.00
    NZ$ 999.00
  • N1 micromotor Complete - Marathon
    Complete Set w/45000 rpm hand piece
     Speed ‐ 2000 to 45000rpm ‐digital display [rpm]
     Strong torque and continuously variable speed control
     Dual handpiece connector operates one handpiece at a time
     Forward 3 and reverse switch
     Automatic stop and reset when the circuit is overloaded
     Feedback circuitry produce more power
     No noise ‐ vibration ‐ and heat after long hours of operation
    Includes:
     1 control box
     1 SH37s handpiece ( capable of managing 2 Handpieces )
     1 variable foot pedal; 1 Hp holder
  • Forte 100 - Saeshin
    Low noise and vibration
    Hand/Foot speed control system
    Built-in micro processor ( Self diagnosis "error" display)
    Work memory storage and Handpiece auto recognition function
  • Forte 300 - Saeshin
    FWD/REV Function
    Hand/foot speed control system
    Built-in micro processor (Self diagnosis with "error" display, usage memory storage and a Handpiece auto recognition function)
  • OZ Black - Saeshin
    Desktop type
    Ergonomic design
    Excellent durability
  • Oz - Saeshin Brushless Motor
    Digital watch
    Strong torque at low speed
    Vertical/Horizontal placement
  • Saeshin Strong 206
    Dual-Port system
    Powerful torque in low speed and suitable for milling
    For many different industries including dental technic
    FWD/REV Function
    Hand/Foot speed control system

1 2 Next »